The STAGE BLITZ is a powerful,



23 channels DMX 512

very compact and especially competitive

laser show projector.

XY yoke - XY scanner position - XY amplitude

256 gobo - 256 effects or animations

2 doubles diffractions wheel whit 3 effects each

and speed and position control

Focus - Intensity - Sparkling POINT

Digital geometric correction

Rotation - Strobe - Main zoom

Independant effect zoom - Iris



The dust-proof housing contains:

Green 5 Watt DPSS high power laser with beam shaping

Processor controlled power supply for the laser

Projection unit with two CT6800 scanners and

the time-proven high speed driver

electronics by L.A.



The STAGE BLITZ is especially suited

for applications with little need for adjustment.



After it is turned on the laser automatically goes to its operating

state and emits as soon as a modulation signal is applied.

The laser power is controlled only by the modulation signal.









Its Outstanding Features Are

extremely simple operation

outstanding projection quality

handy dimensions

favorable price

well thought out pratical details

comprehensive safety concept (laser safety, operating safety)

guaranteed high reliability

very quickly ready for operation (less than 2 minutes heating phase),

can be turned off immediately without post operation cooling time

can be controlled by any laser controller



Technical Data

Diode pumped thin-disc laser JenLasTM D2- by JENOPTIK, Germany

wave length 532 nm, guaranteed minimum laser output power 5W

CW, laser class IV lifetime more than 10.000 hours



High value triple beam expander/collimator for best beam quality

beam diameter approx. 3mm, divergence approx. 1 mrad (full angle)



Analog modulation of the laser power up to approx.100 kHz by direct modulation of the diode current,

suitable for instance for softblanking and TV-like raster images



Processor controlled compact power supply for the laser head and the scanners

high efficiency (electric power consumption during normal operation approx.160 Watts)

permanent monitoring of all important functions, immediate shut-down in case of malfunction



Thermoelectric cooling/heating of the laser diode and the non-linear optics

Cooling/heating system with generously dimensioned heat sink, suitable for ambient temperatures from 0°C to 50°C



Low noise temperature controlled fans



The air flow is completely separated from the optical part so that optical components do not get dirty even in

polluted environments



Set of CT 6800 X-Y scanners with LaserAnimation high speed driver electronics



Scanner safety circuit with adjustable active window



Dimensions/Connectors/Displays

LxWxH without yoke: approx. 710mm x 510mm x 400mm

Weight: approx. 30 kg



Mains connector (IEC) with fuse and power switch main voltage

90-132 VAC,180-264 VAC, 47-63 Hz, auto switch Status LED

Key switch for turning the laser on resp. off

Laser emission display

Interlock connector XLR 3pin

ILDA-ISP DB 25 for scanner- and modulation signals

Inversion and size adjustment of the x and y signals, signal LEDs,

adjustment and display of the active window of the scanner safety control